AMS-20A solar dryer太阳能烘干机
AMS-20A Micro solar drier/ processor for vegetables and fruits
AMS-20A1 EXW 3560
AMS-20A2 EXW 3860
外形尺寸2.1*0.95*1.5m
纸箱包装尺寸2070*1020*270mm,
毛重50KGS
40高柜108台
AMS-20A1 Solar Dryer lid made of transparent fibre glass sheet, thickness of 3-4 mm
Solar Dryer lid support made of 25 x 25 angle iron.
Solar Dryer lid dimensions: 2000X950 mm
Solar Dryer Frame made of 25 x 25 angle iron.
Walls of the dryer made of galvanized sheet.
Wall height up to :300 mm
Length of solar Dryer wall:2000 mm
Width of solar Dryer frame:950 mm
Frame cover made of galvanized sheet with 32 holes for ventilation
Solar panel installed with 18v output and capable to run the fan without using any battery cell
Galvanised tray for food items. The tray cells should be 50mmx 50mm
Galvanised tray dimensions: thickness with Rubber wheel:1900X900 X70 mm
Solar Dryer legs made of 25 x 25 iron angle; 500mm long with Rubber wheel with total locking devices - Wheel x wheel width 10*310 x 3 cm
Fan installed on the side of the wall, the fan is covered with gauze/screen to avoid insects entering, and the circulation of fan per second is 100.
AMS-20A
1.1 太阳能烘干机盖由透明玻璃纤维板制成，厚度为 3-4 毫米
1.2 太阳能烘干机盖支架由 25 x 25 角铁制成。
1.3 太阳能烘干机盖尺寸：2000 毫米长 x 950 毫米高
1.4 太阳能烘干机框架由 25 x 25 角铁制成。
1.5 由镀锌板制成的干燥器壁。
1.6 直到盖子的墙壁高度：300 毫米
1.8 太阳能烘干机壁长：2000 mm
1.9 太阳能烘干机框架宽度：950 mm
1.10 框架盖由镀锌板制成，带有 32 个通风孔
1.11 风扇安装在墙边，风扇用纱布/屏风覆盖
避免昆虫进入，风扇每秒转数为100。
1.12 太阳能电池板，安装 30 伏输出，无需风扇即可运行
使用任何电池
1.12 食品用镀锌托盘。网格应为 50mmx 50mm
1.13 镀锌托盘尺寸：1900 毫米长 x 900 毫米宽 x 70 毫米
带橡胶轮的厚度
1.14 太阳能干燥器支脚，由 25 x 25 铁角制成； 500 毫米长，带橡胶
可以锁定装置的轮子 - 轮子尺寸 10 x 3 cm
Technical Specifications for AMS-20A2 Micro Solar Dryers
|
Technical Specifications for AMS-20A2 Micro Solar Dryers |
||
|
S/N |
ltem |
Specifications |
|
1 |
Type of Machine |
Micro Solar Dryers |
|
2 |
Dry Capacity |
20-25 Kg |
|
3 |
Length of solar Dryer wall |
1900mm |
|
4 |
Width of solar Dryer frame |
900mm |
|
5 |
Height |
1700mm |
|
6 |
Net weight |
60Kgs |
|
7 |
Cover transparent hard fibre glass sheet |
1.5mm thickness |
|
8 |
support is made of square pipe |
25 x 25mm |
|
9 |
Frame cover made of galvanized sheet |
with 32 holes for ventilation |
|
10 |
Handle of dryer |
Stainless steel |
|
11 |
Cable |
0.2mm2 |
|
12 |
On /off Switch |
12v |
|
13 |
Solar photovoltaic panel |
36v/50W, support electric for fan |
|
14 |
Food trays |
1pcs,Galvanised tray dimensions: 1850 x 850 x 60 mm thickness with Rubber wheel |
|
15 |
Tray materials |
Galvanised |
|
16 |
Rubber wheel of dryer |
4 units,Φ8*6cm |
|
17 |
Battery for Solar Charge Controller |
1unit,6.5A,12V |
|
18 |
Color of dryer |
Black,Furnace baked paint |
|
19 |
Smart Solar Charge Controller |
1unit,Built-in microcontroller, one-key setting, digital display, automatic memory function. large LCD screen clearly displays . condition and data, easy to switch modes and parameter configurations, all parameters can be adjusted. |
|
20 |
Automatic switch |
12v |
|
21 |
Dehumidifier size |
12*12cm,12v,5w,speed 1500rpm |
|
22 |
Installation & Orientation/training |
E-book/Online/Video to guide |
Tech details:
|
1.0 |
Technical Specifications: General |
|
1.1 |
Solar Dryer lid made of transparent fibreglass sheet, thickness of 3-4 mm |
|
1.2 |
Solar Dryer lid support made of (25-30) x (25-30) angle iron. |
|
1.3 |
Solar Dryer lid dimensions: (1900-2000) mm long x (900-950) mm height |
|
1.4 |
Solar Dryer Frame made of 25 x 25 angle iron. |
|
1.5 |
Walls of the dryer made of galvanized sheets. |
|
1.6 |
Wall height up to lid: 250-300 mm |
|
1.7 |
Length of solar Dryer wall: 1900-2000 mm |
|
1.8 |
Width of solar Dryer frame: 900-950 mm |
|
1.9 |
Frame cover made of galvanized sheet with 32 holes for ventilation |
|
1.10 |
Fan installed on the side of the wall, the fan is covered with gauze/screen to avoid insects entering, and the circulation of the fan per second is 100. |
|
1.11 |
Solar panel installed with 36 v output and capable of running the fan without using any battery cell |
|
1.12 |
Galvanised tray for food items. The try cells should be 50mmx 50mm |
|
1.13 |
Galvanised tray dimensions: 1850- 1900 mm long x 850-900 mm wide x 60-70 mm thickness with Rubber wheel |
|
1.14 |
Solar Dryer legs made of (25-30) x (25-30) iron angle; (500-550) mm long with Rubber wheel with total locking devices - Wheel Ø x wheel width 8 x 6 cm |
|
2.0 |
Solar Charge Controller |
|
2.1 |
Built-in microcontroller, one-key setting,digital display,automatic memory function. |
|
2.2 |
4-level PWM charging management, large LCD screen clearly displays condition and data, easy to switch modes and parameter configurations, all parameters can be adjusted. |
|
2.3 |
This controller has double reverse current protection, built-in short circuit protection, open circuit protection, reverse connection protection,overload protection, and generates low heat. |
|
2.4 |
Easy to install and operate, the charging controller should first connect the solar panel, and then connect the load, disassembly order is opposite to the wiring order, with doublescrew backflow protection. |
|
2.5 |
Small, easy to carry and store, convenient, can be used for a long time, a good solar regulator. |
|
2.6 |
Rated Voltage: 12V 24V automatic |
|
3.0 |
Battery for Solar Charge Controller |
|
3.1 |
AGM (Absorbed Glass Mat) separators with superior grid and component designs |
|
3.2 |
Longer shelf life, minimum one year |
|
3.3 |
Extreme vibration resistance |
|
3.4 |
Heavy-duty, flushed mount terminals |
|
3.5 |
Voltage: 12 |
|
3.6 |
Capacity: 6.5Ah |
|
3.7 |
Weight: 1 - 1.70 kg |
|
3.8 |
Terminal Layout: + - |
|
4.0 |
Manuals: |
|
4.1 |
Operators’ handbook (printed or on CD) in English, one for each unit |
|
4.2 |
The cost of the manuals should be included in the DPU cost of the equipment. |
